Intek Mobile User's Guide version 1.1
DNP 3.0 - PNC FRTU
PreviousNext

FileName: Default.cfg

[GENERAL]

# GENERAL: PARAMETER,VALUE

#if serial number not match with modem, program will stop and generate a LicenseError.txt file
serial_number,5A5B40-525F04-02005B-564251-5D0706

#Modem Identifier (ModemID)
modem_id,1

# Provider APN
wireless_apn,www.xlgprs.net
wireless_username,xlgprs
wireless_password,proxl

[TCPIP]
# -----------------------
# TCPIP: RemoteIP,Port
#------------------------
10.89.1.1,9016


FileName: intek.cfg

[GENERAL]
# GENERAL: PARAMETER,VALUE

otap_url,http://10.89.1.1/download/intek.jad

#reboot interval, default value 25 hours
reboot_interval,25

#Healthy Check, default value 30 seconds (modem sending TESTFR to Master)
healthy_check,30

# Dump intekMobile database when startup, 0=Disable, 1=Enable
# dump_database,0

[RS232]
# SPEED : Device baud rate (300,600,1200,4800,9600,19200, ..etc.)
# DATA : Data length (8 or 7)
# PAR : Parity (0=None, 1=Odd, 2=Even)
# STOP : Stop bits data (1;2)
# FLOW : Flow control (0=NONE; 1=RTS+CTS)
# SCAN_INTERVAL : Milli Seconds
# ---------------------------------------------
# RS232: SPEED,DATA,PAR,STOP,FLOW,SCAN_INTERVAL
#----------------------------------------------
9600,8,0,1,0,500

[REMOTELOG]
# --------------------------------
# Option: 0=Disable, 1=Enable
# REMOTELOG: RemoteIP,Port,Option
#---------------------------------
#10.89.1.1,9010,1

[DEVICES]
#----------------------------------------------------------------------------------------------
# DEVTYPE,DEVID,NAME,RTUID,TXRETRY,OPTION,DBFILE,protosp1,protosp2,protosp3,protosp4,protosp5
#----------------------------------------------------------------------------------------------
256,0,InTekMobile ,0,0,0,uplink-iec104.db,0,0,0,0,0
260,1,PNCFRTU ,1,1,0,pnc_frtu.db,1024,0,0,0,0


FileName: pnc_frtu.db

# DNP 3.0 Tag Types:
# TTYPE_DNP3_BINARY_INPUT = 1
# TTYPE_DNP3_BINARY_OUTPUT_STATUS = 2
# TTYPE_DNP3_CONTROL_BLOCK = 3
# TTYPE_DNP3_COUNTER = 4
# TTYPE_DNP3_FROZEN_COUNTER = 5
# TTYPE_DNP3_ANALOG_INPUT = 6
# TTYPE_DNP3_FROZEN_ANALOG_INPUT = 7
# TTYPE_DNP3_ANALOG_OUTPUT = 8
# TTYPE_DNP3_ANALOG_OUTPUT_BLOCKV1 = 9
# TTYPE_DNP3_ANALOG_OUTPUT_BLOCKV2 = 10
# TTYPE_DNP3_IBINARY_INPUT = 129

# DNP 3.0 Tag Options:
# TOPT_DNP3_DIRECTOPERATE = 1
# TOPT_DNP3_CONTROL_REVERSE = 2
# TOPT_DNP3_MOMENTARY = 4

#-------------------------------------
# Name,Address,SubAddress,Type,Option
#-------------------------------------

[SCANGROUP]
#object,variant,start_address,end_address
1,1,0,8
30,2,0,12

[TAGS]
AmpR ,0,0,6,0
AmpS ,1,0,6,0
AmpT ,2,0,6,0
AmpN ,3,0,6,0
VoltR ,10,0,6,0
VoltS ,11,0,6,0
VoltT ,12,0,6,0
BreakerStatus ,0,0,1,0
LocRem ,1,0,1,0
TripR ,5,0,1,0
TripS ,6,0,1,0
TripT ,7,0,1,0
TripN ,8,0,1,0
BreakerCtrl ,0,0,3,1

# Internal Status #
CommFail ,65000,0,129,0


FileName: uplink-iec104.db

#=========================================================================================================================
# Name,IOA,Type,Option,RawMin,RawMax,EngMin,EngMax,DeadBand,SclFactor,loLimit,hiLimit,srcDevId,srcTagType,srcAdr,srcSubAdr
#=========================================================================================================================

# IEC 870-5-104 tag type:
# IEC104_SINGLE_STATUS 8193
# IEC104_DOUBLE_STATUS 4354
# IEC104_MEASURED_SCALED 5380
# IEC104_MEASURED_FLOAT 6149
# IEC104_INTEGRATED_TOTAL 4871
# IEC104_CONTROL_SINGLE 8264
# IEC104_CONTROL_DOUBLE 4425
# IEC104_SET_VALUE_SCALE 5451

# IEC 870-5-104 tag options:
# TOPT_IEC104_USEHILIMIT = 0x0001
# TOPT_IEC104_USELOLIMIT = 0x0002
# TOPT_IEC104_USEDEADBAND = 0x0004
# TOPT_IEC104_HAVESCALEFACTOR = 0x0008
# TOPT_IEC104_HAVESCALEINFO = 0x0010
# TOPT_IEC104_CTRL_FROM_TWO_TAG = 0x0020

BreakerStatus ,1,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,1,0,0
LocRem ,2,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,1,1,0
TripR ,3,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,1,5,0
TripS ,4,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,1,6,0
TripT ,5,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,1,7,0
TripN ,6,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,1,8,0
BreakerCtrl ,7,4425,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,3,0,0
AmpR ,8,5380,2,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,0,0
AmpS ,9,5380,2,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,1,0
AmpT ,10,5380,2,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,2,0
AmpN ,11,5380,2,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,3,0
VoltR ,12,5380,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,10,0
VoltS ,13,5380,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,11,0
VoltT ,14,5380,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,6,12,0
CommFail ,15,8193,0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1,129,65000,0


Integra Teknik Asia, PT
website:
http://www.integrateknik.com
email: inteksupport@integrateknik.com